Lift Kit set +1.6″ for Toyota Hilux 7th Gen 4WD/AWD | AN10, AN20, AN30

  • Product Code:
    KTSU-3740
  • Product Article:
    product-4220
  • Rating:
  • Availability:

    In Stock

288,51 €

currency on the site: Euro (EUR).
Shipping already included in the cost of good FREE WORLDWIDE SHIPPING

New at RisingTuning, Lift Kit for the 4WD 7th-generation Toyota Hilux 2004-2013.
The total height of the Toyota Hilux 7 will be 40mm / 1.6 inches

Item content:

• x2 Front steel spacers | 20 mm / 1 inch
Spacer over the front strut TLC-P3, Lower the upper mount of the front strut. 
Fits on Toyota OEM support 48609-60030
Mounted on front struts. The standard studs need to be replaced with the extended studs from the kit.
Fasteners:
- x6 Studs M10х1,25x5

• x2 Shock absorber extension | H45x19x50mm / 2 inches
Extend regular shock absorbers with a bushing width of 45 mm, and a bore diameter of 19 mm.
Fasteners:
- x2 Bushing D19-L44, stainless steel.
- x2 Bolt M14x1,25x70
- x2 SNK nut M14

• x2 Rear leaf spring spacers (Blocks) | 60x40mm / 1.6 inches
• x4 U-Bolts| 60x225xM14
Installed between the axle and the leaf spring.
Replace the standard stepladders with longer ones from the kit.
Fasteners:

- x8 Step-nut M14
- x8 Spring washer D14

Features:
• The spacers are manufactured on professional laser, turning and welding equipment, in compliance with the necessary specifications.
• They have a protective polymer and zinc coating to prevent corrosion.
• Welding Procedure: MIG
• Hardware metric grade 10.9 zinc

Weight: 7.2kg.

Important information:
Please note that this lift kit for 7th generation Toyota Hilux is only for all wheel drive (AWD/4WD) versions,
if you have rear wheel drive (FR/RWD) Rear Wheel Drive version, you do not need this kit:
Lift Kit set for RWD Toyota Hilux 7th Generation

This complete lift kit is compatible with this cars:

Short: All AWD Toyota Hilux 7th gen (2004-2013) 

TOYOTA HILUX (4WD)

Europe & World:
Toyota Hilux [AN10, AN20], 7 Gen, Pickup, 12.2007 - 09.2010, Body: KUN15, KUN25, KUN26
Toyota Hilux [AN10, AN20], 7 Gen Facelift, Pickup, 08.2008 - 08.2011, Body: KUN15, KUN25, KUN26, KUN25L, KUN26L
Toyota Hilux [AN20, AN30], 7 Gen Second Facelift, Pickup, 07.2011 - 01.2015, Body: KUN25, KUN26, KUN35

UAE & World:
Toyota Hilux [AN10, AN20, AN30], 7 Gen Second Facelift, Pickup, 07.2011 - 05.2015, Body: KUN10, KUN15, TGN10, TGN11, TGN15, TGN16, TGN26

Years of issue Hilux: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

Advantages:
✅ After installing this extra-durable, easy-to-install and very affordable spacers all terrain features of your car will increase thanks to rised ground clearance and you will conquer the worst off-road.
✅ Sharp land bends, speed bumps, parking near curbs, maneuvering in the snow and on country roads, wherever before you had to be on the alert - no longer a problem with an additional 50mm under the bottom.
✅ Our spacers are often used when the stock springs lose their stiffness and spacers are the cheaper way to return the car to factory height than buying new springs.
✅ Spacers made of polyurethane and nylon have an additional damping effect, with them the ride will be even more pleasant. Whereas aluminum and steel spacers are essentially forever and will never need to be replaced.
✅ Also spacers are indispensable when installing larger diameter wheels.

  • Toyota
    • Hilux
      • VII 2004-2015 (AN10, AN20, AN30)

ProductReviews

Product rating Lift Kit set +1.6″ for Toyota Hilux 7th Gen 4WD/AWD | AN10, AN20, AN30

Leave a product review and get a coupon for your next purchase in our store


You may also like